Technics SC-DV290 ARecording the radio, BTape-to-taperecording, Tune to the required station

A

3 2

￿

2	¥REC	TUNED ÎNR
	PAUSE	REC
		2

MHz

3

B

1 2

￿

1 21DECK 1/2 ￿

2	TAPE EDIT
		2
		ÎNR

REC

ARecording the radio

Preparation: Do the preparatory steps (➡ page 35).

1 Tune to the required station.

(➡ page 27, 28)

2 Press [q REC PAUSE].

The deck goes into the recording standby mode and the play indicator “ ” or “ ” starts flashing.

3 Press [ ] (reverse side) or [ ] (forward side) to start recording.

To stop recording

Press [w].

To temporarily stop recording

Press [q REC PAUSE].

The deck goes into recording standby mode.

To resume recording press [ ] or [ ] with the flashing indicator.

BTape-to-tape recording

Preparation:

pDo preparatory steps 1 and 3 (➡ page 35). pInsert the tape to be recorded in deck 1.

1 Set the tape direction on both decks.

Press [DECK 1/2] to select “DECK 2”.

First press [	] or [	], and then [w].
Repeat steps	and	for deck 1.

2 Press [TAPE EDIT] to start recording.

The indicator “ ” or “ ” shows deck 2 direction.

If either deck 1 or deck 2 stops, the other deck also stops.

To stop recording

Press [w].

Both decks stop.

To enjoy another source while recording

Start playing the other source.

You can change the volume level and tone quality without affecting the re- cording.

Note

The recording level and the noise reduction effect of the original (playback) tape will be recorded on the new tape.

Recording operations

RQT6894

37