A
B
C
D
E
| 75h |
| b | a | |
FM |
| ANT |
|
| |
|
|
|
|
| |
AM | ANT |
|
|
| |
|
|
|
| ||
LOOP |
|
|
| ||
EXT |
|
|
| ||
|
| FM ANT |
|
| |
|
| 2 | 75h | c | 15mm d |
|
| GND | |||
|
| AM ANT |
|
| |
|
| LOOP |
|
| |
|
| EXT |
|
| |
|
| 1 |
|
| 30mm |
|
| AM ANT |
|
|
|
|
| LOOP |
|
|
|
|
| EXT |
|
|
|
5–12m
1, 1 , | 2 PAUSE |
| ¥REC |
Optional antenna connections
If radio reception is poor, connect outdoor antennas to the antenna termi- nals on the tuner/amplifier ([A]).
FM outdoor antenna
[B]For Continental Europe and Russia
Connect the 75 j coaxial cable ( ) from the outdoor antenna to the FM antenna terminal.
For UK only
Attach the included antenna plug adaptor ( ) to the end of the cable before connection.
[C]For Australia and N.Z.
After preparing the 75 j coaxial cable as described below, connect the shield braid ( ) to GND and the core wire ( ) to 75 j.
Preparing the 75 j coaxial cable
Remove a piece of the outer vinyl.
Twist the shield braid to expose the core wire. pDisconnect the FM indoor antenna.
pThe antenna should be installed by a competent technician.
DAM outdoor antenna
Use a piece of vinyl covered wire as an AM outdoor antenna. Connect it to AM ANT EXT and run it horizontally across a window or other convenient location.
Leave the loop antenna connected.
Note
Disconnect the antenna when the unit is not in use.
Do not use the antenna during an electrical storm.
E Using other equipment
| Listening to an external source |
| functions | |
1 | Press [INPUT SELECTOR] to select the external | |||
| ||||
| source. |
| ||
| Each time you press the button: |
| ||
| TUNERDVDTAPEVCR (EXT)VDP (AUX) | convenient | ||
| See the unit’s manual for details on operation and connection. | |||
| $ |
|
| |
| On the remote control |
| ||
2 | Press [VCR (EXT)/VDP (AUX)]. |
| ||
Operate the unit. |
| |||
|
| and | ||
| Recording an external source |
| ||
Press [INPUT SELECTOR] to select the external | operations | |||
| ||||
source. |
| |||
Select Dolby NR and reverse mode. |
| |||
(➡ page 35) |
| |||
Press [q REC PAUSE]. | Timer | |||
Press [ ] or [ ] to start recording. | ||||
Start the source to be recorded. |
| |||
| See the unit’s manual for details on operation and connection. |
| ||
To stop recording
Press [w] on the deck.
To temporarily stop recording
Press [q REC PAUSE].
The deck goes into the recording standby mode.
To resume recording press [ ] or [ ] with the flashing indicator.
Recording onto an external unit
Press [INPUT SELECTOR] to select the source to be recorded.
Start recording on the external unit and start playing the source to be recorded.
RQT6894
45
