Simple setup
Simple setup
STEP1 Locating
Components | Speakers |
|
DVD/Video CD/CD changer Sound processor | Optimum location |
|
| Distance: ANBNCNDNE | |
| Front speaker (left) | Front speaker (right) |
| Center speaker |
|
Stereo cassette deck Stereo tuner/amplifier
| B | C |
| A | |
Sound processor |
|
|
Stereo tuner/amplifier |
|
|
| D | E |
DVD/Video CD/CD changer |
|
|
Stereo cassette deck |
|
|
| Surround speaker (left) | Surround speaker (right) |
Note | Use only the supplied speakers. |
|
Do not put the DVD/Video CD/CD changer on the top of the tuner/ampli- | Using other speakers can damage the unit and sound quality will be neg- | |
fier. Heat can damage your discs. | atively affected. |
|
Caution
pUse the speakers only with the recommended system.
Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire.
Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.
pDo not attempt to attach these speakers to walls using meth- ods other than those described in this manual.
Notes on speaker use
Front speakers
Left and right front speakers are exactly same.
Surround speakers
Place either side of the listening position, or slightly to the rear, about 1 meter higher than ear level with the Technics logo facing toward the listening position.
The effect varies with the type of music and the music source.
If you are unable to position the surround speakers as recommended, you can put them near the front speakers and still achieve a
RQT6894
wYou can damage your speakers and shorten their useful life if you play sound at high levels over extended periods.
wReduce the volume in the following cases to avoid damage. pWhen playing distorted sound.
pWhen the speakers are receiving howling from a microphone (for Australia and N.Z.) or record player, noise from FM broadcasts, or continuous signals from an oscillator, test disc, or electronic in- strument.
pWhen adjusting the sound quality. pWhen turning the unit on or off.
If irregular colouring occurs on your television
These speakers are designed to be used close to a television, but the picture may be affected with some televisions and
If this occurs, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the problem. If it persists, move the speakers further away from the television.
Attaching to a wall
Set the speaker onto screws and slide through bracket to lock into position.
70 mm
Note
The wall or pillar on which the speakers are to be attached should be capable of supporting 5 kg per screw.
6
