Simple set-up and play
STEP2 Speaker leads | The illustrations show | ||
Do not connect the AC mains lead until all other connections are complete. | |||
|
| ||
|
| Center speaker | |
[EH790] | Surround speaker | Surround speaker (left) | |
Surround and center speakers |
| ||
(right) |
|
STEP3 | Antennas |
FM indoor antenna | For Australia and N.Z. |
| Twist the vinyl tip and pull off. |
Fix the other end of the antenna where reception is best.
Adhesive tape
Simple
R | L | SURROUND |
CENTER |
|
|
Right | Left |
|
AM indoor antenna
Twist the vinyl tip and pull off.
Simple
Keep loose antenna cord away from other wires and cords.
Front speaker
Connect the leads to the terminals of the
Speaker side
Tuner/amplifier side
STEP4 Flat cables and AC mains lead
Flat cables
Connecting
Disconnecting
same colour.
LF and HF stand for low frequency and high frequency.
Connect the left (L) side in the same way.
Note
≥Never
≥Be sure to connect only positive (red or grey) wires to positive (r) terminals and negative (black or blue) wires to negative (s) terminals.
Incorrect connection can damage the speakers.
Twist the vinyl tip and pull off.
RQT6866
Grey
HF
Blue | Grey | |
| ||
Black | Red | |
LF | ||
| ||
| Blue | |
| Red | |
| Black |
Red Grey
Black |
|
|
|
| HF | |
Blue |
| HF | LF | |||
LF | (6™) | |||||
(8™) | ||||||
| (8™) (6 | ™) |
| L | ||
|
| R |
|
| ||
|
|
|
|
|
Black
Grey
Blue Red
Keep the cables as flat as possible against the back of the unit. Connect the connectors to the terminals of the same colour. Incorrect connection can damage the unit.
B1
A1 | B2 |
|
AC mains lead
(For the United Kingdom only)
BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 4 BEFORE CONNECTION.
Insertion of connector
Even when the connector is perfectly in- serted, depending on the type of inlet used, the front part of the connector may jut out as shown in the drawing.
However there is no problem using the unit.
To household mains socket
Appliance inlet
Connector
Approx. 6 mm
For your reference:
Information you enter into the unit’s memory, except for time, remains intact for up to two weeks after the mains lead is disconnected.
RQT6866
6 | 7 |