REMOVING THE STAND & WALL MOUNTING
9
Removing the stand
1) Remove the four screws highlighted
below
2) The stand will now come off
IMPORTANT— BEFORE
DRILLING ANY HOLES IN THE
WALL ENSURE YOU ARE NOT
DRILLING WHERE THERE
COULD BE ANY ELECTRIC
WIRES, WATER OR GAS PIPES
This TV requires a universal wall mount
with mounting holes of
400mm(H) x 200mm(V) (VESA – 400x200)
1) The wall mount can now be easily
attached to the mounting holes on rear
of the TV. These holes are indicated
in the picture below
Important – If wallmounting this TV,
only use the screws already
provided in the wallmounting holes.
Using other screws which are longer
could cause irrepable damage to
internal parts.
2) Although there are no live parts exposed when
removing the stand, (in the event of wall
mounting the TV) for aesthetic purposes,
included in the accessory pack is a cover
plate which can be clipped into the underside
of the TV.
tesco english manual 32-250 pagePage 1 29. 7. 2009 8:39:11