Psion Teklogix none Connecting The Internal Modem, Setting Up Dialing, Specifications, 111

Chapter 7: Configuring Communications

Connecting To An ISP Or RAS

7.4.3.2Connecting The Internal Modem

The NETBOOK PRO’s modem port provides the connection access to the internal modem using the RJ-11 telephone cable.

Specifications

•Data - V.92, 56Kbps (AT command).

•Fax - 14.4 Kbps (Fax control command Class 1).

Connecting The Modem

The modem port is located under a rubberized cover, on the left side of the NETBOOK PRO. To connect the internal modem cable, follow the steps below:

1.Open the modem cover on the left side of the NETBOOK PRO by pulling away the rubberized cover.

2.Plug one end of the RJ-11 telephone cable into the modem connector.

3.Connect the other RJ-11 connector into an active (analog) phone jack. (It may be necessary to use a country-specific modem adaptor).

Warning:	In case of a lightning storm, unplug the modem cable from the
	telephone jack.
	Do not connect the modem to a digital telephone line. A digital line
	will damage the modem.

4.In the NETBOOK PRO programs, go to Start/Settings/Control Panel/Built-In Modem Settings, then select the Country of Use.

7.4.3.3Setting Up Dialing

When you connect to the Internet, your NETBOOK PRO will need to dial your service provider’s telephone. You can set up different dialing ‘locations’ so that your NETBOOK PRO knows how to dial the number correctly, e.g. if you're dialing from the ‘office’ location, you might need to add a ‘9’ before the number you want to dial.

Psion Teklogix NETBOOK PRO User Manual 111