Psion Teklogix none user manual Servers Menu

Chapter 7: Configuring Communications

NETBOOK PRO Bluetooth Settings

After the PIN has been validated, you will see an asterisk (*) in the PIN column in the Devices list box, indicating that this device has a PIN set. Once a PIN is entered, it is saved in the registry. To remove the PIN, press Set PIN, then <Enter>.

If the NETBOOK PRO tries to connect with a remote device for which no PIN has been set but requires a PIN, and has Authentication enabled, you will be prompted to verify the PIN. The Authentication Request dialogue will appear. Enter the PIN, press OK, and the devices will be connected.

7.3.1.2Servers Menu Page

The Bluetooth connection is initiated from your NETBOOK PRO to the remote device, therefore the NETBOOK PRO is called the ‘client’ and the remote is called the ‘server’. The Servers menu shows the server profiles that can be activated in your NETBOOK PRO. There is currently one server profile available: Serial.

Place a checkmark in the checkbox to activate the server and it will show the associ- ated port name beside the server name. The port name also follows the convention under the Property menu (see Section 7.3.1.3). Once you activate a server profile, it

100Psion Teklogix NETBOOK PRO User Manual