Psion Teklogix none user manual Connecting To An ISP Or RAS, Connecting An External Modem

Chapter 7: Configuring Communications

Connecting To An ISP Or RAS

3.To enable IPv6 network support, check the box, and click OK. Because the NETBOOK PRO must reset in order to activate the change, a dialoge box will open to confirm the change or allow you to cancel to prevent resetting. You may also disable the IPv6 feature by unchecking the box, and allowing the NETBOOK PRO to reset once again.

7.4.3 Connecting To An ISP Or RAS

Once you have established an account with your Internet Service Provider (ISP) or Remote Access Server (RAS) and gather the necessary configuration information, you are ready to create a connection on your NETBOOK PRO for your account.

The NETBOOK PRO supports several connection types: Dial-Up, Direct, Virtual Private Network, and DSL (Digital Subscriber Line) using PPP over Ethernet.

The following steps will show you how to create a new Dial-Upconnection for your ISP or RAS account.

7.4.3.1Connecting An External Modem

1.Connect your NETBOOK PRO to the modem using the NETBOOK PRO’s serial cable.

What Do I Need To Do This?

To connect your NETBOOK PRO serial cable to your modem you may require a Psion Teklogix modem cable adaptor. You can only use a Psion Teklogix adaptor, which can be obtained from your local distributor.

2. Connect your modem to the telephone socket and switch on the modem.

110Psion Teklogix NETBOOK PRO User Manual