Chapter 4: Configuring The Unit
Setting Up ActiveSync
•Partnership - A partnership connection allows for synchronization of files,
You can disconnect any ActiveSync connection by
4.2.1.2Connecting Via RS-232 Serial
Once the first time ActiveSync serial connection has been established, inserting the serial cable will create an autoconnection to the PC. To establish the connection using ActiveSync via
1.Connect the NETBOOK PRO ActiveSync serial cable to the serial communications port on your computer (usually COM1 or COM2).
2.Connect the other end of the serial cable to the NETBOOK PRO serial port. The port is behind the rubber cover on the left hand side of the unit
(labelled with the ![]()
RS232 symbol).
On the NETBOOK PRO...
3.Open the NETBOOK PRO’s Control Panel and
4.Verify that the Use Connection checkbox is checked and that the unit will connect using ‘Serial Cable on Com 1’.
On the PC...
5.
6.Go to File/Connection Settings in the ActiveSync window. The Con- nection Settings dialogue appears.
7.Place a checkmark in the checkbox labeled ‘Allow serial cable or infra- red connection to this COM port:’, and select the COM port to which you connected the cable in Step 1. Press OK.
Psion Teklogix NETBOOK PRO User Manual | 53 |