GETTING STARTED
HANDSET PREPARATION
Remove the protective strip from the battery compartment to activate the battery.
If the handset behaves erratically or fails to operate the battery should be replaced.
1: Press the catch at the side of the battery compartment. Slide out the battery cage
2:Remove the old battery. Place the new bat-
tery in the cage with the polarity as shown. Close the cage.
There is a risk of fire and burns if the battery is handled improperly. Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
Do not attempt to open or service the battery. Replace only with the battery designated for this product. Discard used batteries in accord- ance with recycling regulations in force in your area.
PLACEMENT |
|
Remove the stand from the | Screw the stand fitmly |
clip at the rear of the frame | into the threaded insert |
Place the frame on a firm stable surface where it is unlikely to fall or get knocked off.
Page 7
