DVD Operation
PLAYBACK
DVD MPEG4 SVCD VCD CD
1.Power on and switch signal source to DVD mode and the unit begins to work.
2.Place the disc (with label side facing user) to the door and the unit will draw in the disc automatically.
The unit begins to read disc information.
3.Press [PLAY] button to begin playing disc.
When the unit is playing a disc, press[ 
] button the first time and the unit enters pause state, while press [ 
] button again and the unit resumes playback.
4. Press [STOP] button to stop playing.
When the unit is playing a disc, press [ 
] button the first time and the unit enters 
] button again and the unit enters stop state.
At the 
] button, the unit will continue to play from the stopped point.
At the stop state, if you press [ 
] button, the unit will play from the beginning point of the disc.
Press [ 
] button when playing MPEG4 discs and the unit enters stop state directly.
5.Press [ 
] button to take out disc.
6.When finishing playing, switch signal source to other working state and press [ 
] button to make the unit enter standby state. Please pull out the power plug from power socket when not using the unit for a long time.
[ 
] button is effective only when selecting DVD signal source. In other signal source ,such as TV,
AV, etc, this button is invalid.
VOLUME CONTROL
DVD MPEG4 SVCD VCD CD
1.Press
2.Press
Press [VOL+] button to increase volume; press
38 | 24" HD Ready 1080p DVD LCD TV User Guide |
