Prestige 2301R/RL-P1C Support Notes
Step 2. Enter the administrator password appear on the page of login and click on login. The default is '1234'
Step 3. On the left column click on Voice to bring you to voice function menu. While in the Voice menu click on Phone to enter phone port configuration page.
Step 4. By using the phone port selector located on upper right of the phone port configuration page select the phone port you wish to configure.
Step 5. Change the phone port parameter as you desired and click Apply when you are finish to save and let the setting to take effect. To configure the 2nd phone port use the phone port selector and select phone2 and follow the step 1 to 5 to complete the 2nd phone port setup.
Each field's detail description is listed below.
| Label |
| Description |
| Phone Port | Use this field to select the phone port that you want to configure. | |
| Settings |
|
|
|
|
|
|
| Speaking |
| Use this field to set the loudness that the Prestige uses for the speech signal |
| Volume |
| that it sends to the peer device. |
|
|
|
|
| Listening |
| Use this field to set the loudness that the Prestige uses for the speech signal |
| Volume |
| that it receives from the peer device and sends to your phone. |
|
|
| quietest and 1 is the loudest. |
|
|
|
|
| Outgoing |
| SIP 1 corresponds to the Prestige’s SIP account. Select whether you want |
| Call use |
| the phone attached to this phone port to use SIP account 1 when you make |
|
|
| a call. |
|
|
|
|
| G.168 Active |
| Select this check box to cancel the echo caused by the sound of your voice |
|
|
| reverberating in the telephone receiver while you talk. |
|
|
|
|
| VAD |
| Select this check box to use Voice Activity Detection (VAD) to reduce the |
|
| bandwidth that a call uses. The ZyXEL device will generate and send | |
| Support |
| |
|
| comfort noise when you are not talking. | |
|
|
| |
|
|
|
|
|
|
| When you are dialing a telephone number the Prestige waits this long after |
| Dialing |
| you stop pressing the buttons before initiating the call. Select how many |
| Interval |
| seconds you want the Prestige to wait after the last input on the telephone’s |
|
|
| keypad before dialing (making) a call. |
|
|
|
|
|
|
| All contents Copyright (c) 2007 ZyXEL Communications Corporation. |
|
| 75 | |
