ZyXEL Communications P-2301R/RL-P1C manual Address, Register

		Prestige 2301R/RL-P1C Support Notes
Address
SIP	Server	Enter the SIP server’s listening port for SIP in this field. Leave this field set
Port		to the default if your VoIP service provider did not give you a local port
		number for SIP.
REGISTER		A SIP register server maintains a database of SIP identity-to-IP address
Server		(or domain name) mapping. The register server checks your user name
Address		and password when you register.
		Enter the SIP register server’s address in this field.
		If you were not given a register server address, then enter the
		address from the SIP Server Address field again here.
REGISTER		Enter the SIP register server’s listening port for SIP in this field.
Server Port		If you were not given a register server port, then enter the port from
		the SIP Server Port field again here.
SIP	Service	A SIP service domain is the domain name that comes after the @ symbol
Domain		in a full SIP URI.
		Enter the SIP service domain name in this field.You can use up to 127
		ASCII Extended set characters.
Authentication		This is the user name for registering this SIP account with the SIP register
User ID		server. Type the user name exactly as it was given to you. Use ASCII
		characters.
Authentication		Type the password associated with the user name above. Use ASCII
Password		Extended set characters.
Block	Caller	Select this check box to not show identification information when you make
ID		VoIP calls. Clear this check box to show identification information when
		you make VoIP calls.
Apply to		Phone 1 and Phone 2 correspond to the ZyXEL device’s physical PHONE
		1 and 2 ports, respectively. Select whether you want to receive calls for
		this SIP account on Phone 1, Phone 2 or both. If you select both, you will
		not know which SIP account a call is coming in on.
		All contents Copyright (c) 2007 ZyXEL Communications Corporation.

73