Prestige 2301R/RL-P1C Support Notes
Is it possible to access a server running behind SUA from the outside Internet? If possible, how?
Yes, it is possible because Prestige delivers the packet to the local server by looking up to a SUA server table. Therefore, to make a local server accessible to the outside users, the port number and the inside IP address of the server must be configured in Menu 15 - SUA Server Setup.
What DHCP capability does the Prestige support?
The ZyXEL device supports DHCP client on the WAN port and DHCP server on the LAN port. The ZyXEL device's DHCP client allows it to get the Internet IP address from ISP automatically. The ZyXEL device's DHCP server allows it to automatically assign IP and DNS addresses to the clients on the local LAN.
How do I used the reset button, more over what field of parameter will be reset by reset button?
You can used a sharp pointed object insert it into the little reset hole beside the power connector. Press down the reset button and hold down for approx 5 second, the unit will be reset. When the reset button is pressed the devices all parameter will be reset back to factory default include, password, and IP address.
The default IP address is 192.168.1.1, Password 1234.
What network interface does the new Prestige series support?
The new Prestige series support auto MDX/MDIX 10/100M Ethernet LAN/WAN port to connect to the computer on LAN and 10/100M Ethernet to connect to the external cable or ADSL modem on WAN.
How does the Prestige support TFTP?
In addition to the direct console port connection, the Prestige supports the uploading/download of the firmware and configuration file using TFTP (Trivial File Transfer Protocol) over LAN.
Can the Prestige support TFTP over WAN?
Although TFTP should work over WAN as well, it is not recommended because of the potential data corruption problems.
All contents Copyright (c) 2007 ZyXEL Communications Corporation.
86
