|
| Prestige |
|
|
|
|
|
| Active= Yes | Bridge= No |
|
| Encapsulation= PPP | Edit PPP Options= No |
|
| Incoming: | Rem IP Addr= ? |
|
| Rem Login= test | Edit IP/IPX/Bridge= No |
|
| Rem Password= ******** |
|
|
| Outgoing: | Session Options: |
|
| My Login= testt | Edit Filter Sets= Yes |
|
| My Password= ***** |
|
|
| Authen= CHAP/PAP |
|
|
Press ENTER to Confirm or ESC to Cancel:
Menu 11.5:
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters= device filters= Output Filter Sets: protocol filters= device filters=
SMT will also prevent you from entering a protocol filter set configured in Menu 21 to the device filters field in Menu 3.1, 11.5, or entering a device filter set to the protocol filters field. Even though SMT will prevent the inconsistency from being entered in ZyNOS, it is unable to resolve the intermixing problems existing in the filter sets that were configured before. Instead, when ZyNOS translates the old configuration into the new format, it will verify the filter rules and log the inconsistencies. Please check the system log (Menu 24.3.1) before putting your device into use.
In order to avoid operational problems later, the ZyXEL device will disable its routing/bridging functions if there is an inconsistency among its filter rules.
All contents Copyright (c) 2007 ZyXEL Communications Corporation.
23
