After Automatic Search is completed, the following message asking for analogue channel search appears on the screen:
To search for analogue channels, select “Yes”. TV switches to the analogue TV mode. Analogue search menu will be displayed.
Select your Country, Language and Text language by using “
” or “
” and “
” or “
” buttons. Press OK or RED button to continue. To cancel, press the BLUE button.
For more information on this process, see “Install Menu” section.
Note: For proper functioning of digital teletext in DTV mode, you should set country as UK in analogue AUTO PROGRAM (for UK broadcasts only).
Do not turn off the TV while initializing first time installation.
General Operation
Press the SOURCE button on the remote control and select DTV/USB to switch the TV set to digital terrestrial television broadcasting.
Information Banner
•Whenever you change channel, using the
at the bottom of the screen (available only in DTV mode). This will remain on the screen for a few seconds.
•The information banner can also be displayed at any time while watching TV by pressing the INFO button on the remote control:
Hint: Not all channels broadcast the programme data. If the name and time of the programme are not available, then information banner will be displayed with blanks.
If the selected channel is locked, you must enter the correct four numeric code to view the channel. “Enter PIN” will be displayed on the screen in such a case:
Electronic Programme Guide
(EPG)
•Some, but not all, channels send information about the current and next events.
•Please note that event information is updated automatically. If there is no event information data available in channels, EPG will be displayed with blanks.
•Press EPG button to view the EPG menu.
•Electronic Programme Guide appears on the screen. It is able to get Information of the channel - programs weekly by means of
English - 11 -
_50153024.indd 11 | 16.08.2009 11:42:26 |
