Note: If the Country option is set to Denmark, Sweden, Norway or Finland, the Language Settings menu will function as described below:
Language Settings
In the configuration menu, highlight the Language Settings item by pressing “
” or “
” buttons. Press OK and Language Settings submenu will be displayed on the screen:
Use “
” or “
” buttons to highlight the menu item that will be adjusted and then press “
” or “
” button to set.
Notes:
•System Language determines the
•Audio Language is used for selecting the soundtrack of a channels.
•Primary settings are the first priority when multiple choices are available on a broadcast. Secondary settings are the alternatives when the first options are not available.
Installation
The Installation menu is mainly intended to help you for creating a Channel Table in the most efficient way. Select Installation from the Configuration menu by pressing “
” or “
” buttons.
Automatic Channel Scan
Automatic channel scan is started by pressing OK button while Automatic channel scan item is highlighted.
The following message appears on the screen:
Highlight Yes or No by using “
” or “
” buttons and press OK button to confirm.
If Yes is selected, automatic search starts.
Selecting No cancels automatic search.
After search is completed for digital channels, a message asking whether to search for analogue channels appears on the screen:
Press the OK button to search for analogue channels. The following menu appears on the screen for analogue channel search:
Select your Country, Language and Text language by using “
” or “
” and “
” or “
” buttons. Press OK or RED button to continue. To cancel, press BLUE button. The following menu will be displayed during the automatic tuning:
After APS is finalized, the programme table will appear on the screen. In the programme table you will see the programme numbers and names assigned to the programmes.
Manual Channel Scan
In manual channel scan, the number of the multiplex is entered manually and only that multiplex is searched for the channels. For each valid channel number, signal level and signal quality are shown on the screen.
English - 18 -
_50153024.indd 18 | 16.08.2009 11:42:38 |
