TechniSat EC 4004 manual Technical data, Mac

*EC 4004 ENGL. 14.12.1999 10:01 Uhr Seite 35

TechniSat EC 4004

8. Technical data

Tuner
input frequency:	950-2050 MHz
input resistance:	75 ohms
input level:	44-78 dBV
input connection:	F connector
bandwidth:	27 MHz
tuning:	PLL frequency synthesis
Outdoor unit supply
LNB supply voltage:	14 V / 18 V switchable at a maximum of 400 mA
	modulation with 22.2 kHz,Vp-p = 500 mV
	can be switched off
	feed only in active mode, switchable to
	permanent feed using an internal coding jumper,
	also in standby mode
polarizer current:	-60 mA... + 60 mA adjustable in steps of
	approx. 2 mA
Video
deemphasis
PAL:	CCIR REC 405-1
MAC:	according to MAC specification
output level:	Vp-p = 1 V
output:	SCART & CINCH connector
output resistance:	75 ohms
Decoder output
mode of operation:	4 different signals switchable
output level:	Vp-p = 1 V or 0.4 V (flat)
output:	SCART & CINCH connector
output resistance:	75 ohms
Audio
carrier frequency (PAL):	5.5 ... 8.7 MHz
IF bandwidth (PAL):	130/200/280/380 kHz switchable
modes of operation (PAL):	mono/stereo switchable
deemphasis (PAL):	50 Ês, 75 Ês, J 17, adaptive
	(Panda-Wegener compatible)
	50 Hz... 15 kHz
output level:	Vp-p = approx. 2 V in case of full drive
output:	SCART & CINCH connector (left, right)
HF modulator
UHF range:	channel 32...42 adjustable
	preset to channel 39
colour standard:	PAL G
UHF output level:	74 +/- 4 dBÊV
UHF output:	IEC male connecto
antenna input	IEC female connector

35