*EC 4004 ENGL. 14.12.1999 9:59 Uhr Seite 21
TechniSat EC 4004
Press the |
| keys to toggle the polarizer current between |
The value changes by 2 units per key depression. Hold the key depressed to change the value continuously.
5.2.3.5 Example
The following example is a short explanation of the most important settings. Please observe chapter 5.2.3 "channel settings" in order to enter the parameters correctly.
The radio channel RADIOROPA INFO (subcarrier of PRO7) is to be memorized to channel 50. ASTRA reception is assumed.
| M/ST | |
1. select table 1 with |
| an d and |
| ||
then enter "03" by using the
Now the picture of PRO7 should be displayed, if not, please follow instructions 2, 3 and 4.
2.press the TUN key, check the receive frequency
3.set LNB voltage
4.when using a polarizer optimize the SKEW value.
5.press the 
6.press A/B
M/ST
7.press
SAT
key and enter the frequency for channel A
and enter the frequency for channel B
to select stereo operation
8. press 
to set the optimal parameters for audio bandwidth, deemphasis and video level of the channel.
MEM
9.The data is memorized in the user table by pressing • and entering the desired channel number.
21
