EN
Basic settings
Setting the clock
After your microwave oven is first plugged in or after a power failure, the clock display will flash to indicate that the time shown is not correct. To set the clock, proceed as follows:
1.Press the Clock key. The hour numbers will start to flash.
Hiding/Displaying the Clock
If the clock display disturbs you, you can hide it by pressing the Clock key for 3 seconds. The dots that separate the hours and minutes will flash but the rest of the clock display will be hidden.
2.Turn the rotating knob to set the correct hour value.
3.Press again the Clock key to set the minutes. The minute numbers will start to flash.
4.Turn the rotating knob to set the correct minute value.
5.To finish, press the Clock key again.
If you want to see the clock display again, press the Clock key again for 3 seconds.
Safety blocking
The oven functioning can be blocked (for example, to stop it being used by children).
1.To block the oven, press the Start/Stop key for 3 seconds. You will hear a sound signal and the display will show the word “SAFE”. The oven is blocked in this state and cannot be used.
42
2.To unblock the oven, press the Start/Stop key again for 3 seconds. You will hear a sound signal and the display will show the time again.
