Operating Basics
AFG3000 Series Quick Start User Manual 39
Arbitrary Waveform Edit Example 1
The following example shows how to use the Line edit function. Paste a ramp waveform before sine waveform:
1. Select Number of Points to set the
number of waveform points to 1000
points.
2. Select New and then select Sine. Save
this waveform to User1.
For saving arbitrary waveforms, refer to
page 36.
3. Next, create a 500 point ramp wave-
form.
4. Select Operation and select Line. Do
the following line edit:
■X1: 1, Y1: 8191
■X2: 250, Y2: 16382
Push Execute. Once again, select Line
from Operation and perform the follow-
ing line edit:
■X1: 251, Y1: 16382
■X2: 500, Y2: 8191
5. Push Execute. Save this waveform to
User2.
6. Next, paste a waveform. Push Read
from... and select User1.
7. Push Paste at Beginning. Select
User2 waveform and then select Paste.
8. The waveform shown here is created.
12
45
3
8
6
7