Operator Tutorial
1502C MTDR User Manual 2–21
Menu-Accessed Functions
NOTE. If you get lost or confused while in a menu, repeatedly press the MENU
button until the instrument returns to normal operation mode.
1. Set the 1502C front-panel controls to:
CABLE Attach 3-ft cable
NOISE FILTER 1 avg
VERT SCALE 500 mr (default)
DIST/DIV 1 ft/div (0.25 m)
2. Pull POWER on.
3. Press MENU to access the Main Menu.
4. Using the n
oPOSITION control, scroll down to Setup Menu.
5. Press MENU to accept this selection.
6. Scroll down to Acquisition Control Menu.
7. Press MENU to accept this selection.
8. Scroll down to Max Hold is: Off.
9. Press MENU to toggle this selection. It should now read Max Hold is: On.
The Max Hold function is now ready.
10. Read the instructions on the display and press MENU again.
11. Press MENU again to exit the Acquisition Control Menu.
12. Press MENU again to exit the Setup Menu.
O
F
F
O
N
ac 0.000 ft
Figure 2–28: Display with VIEW STORE and VIEW DIFF Disabled

Max Hold