Adjustment Procedures
VITS100 NTSC VITS Inserter Instruction Manual 6–3
With the exception of the video signal connection, this step is the starting point
for any adjustment.
HDisconnect power and remove the cabinet. See the Maintenance section of
this manual for instructions.
HConnect the VITS inserter AC power cord to the variable autotransformer.
Turn the power on and set the autotransformer to 110 V.
HConnect a 75 W coaxial cable from the television test signal generator output
to the VITS inserter PROGRAM IN.
HTurn on all test equipment and allow for any required warm-up period.
HFigure 6–1 shows the location of adjustments and test points (TP) used in
this procedure.
Preliminary Setup