Maintenance
VITS100 NTSC VITS Inserter Instruction Manual 7–3
3. Discharge the static voltage from your body by wearing a wrist grounding
strap when handling static-sensitive components. Always service assemblies
that contain static-sensitive components at static-free work stations.
4. Remove any device capable of generating or holding a static charge from the
work station surface.
5. Whenever possible keep the component leads shorted together.
6. Pick up components by the body, never by the leads.
7. Do not slide components over any surface.
8. Avoid handling components in areas where the floor or work surface
covering is capable of generating a static charge.
9. Use a soldering iron that is connected to earth ground.
10. Use only special antistatic suction or wick-type desoldering tools.