Tektronix VITS100 Abbreviations Chassis Parts Mfr. Code to Manufacturer Cross Index

Replaceable Mechanical Parts
10–2 VITS100 NTSC VITS Inserter Instruction Manual
Parts List Column Descriptions
Column Column Name Description
1Figure & Index Number Items in this section are referenced by figure and index numbers to the exploded view
illustrations that follow.
2Tektronix Part Number Use this part number when ordering replacement parts from Tektronix.
3 and 4 Serial Number Column three indicates the serial number at which the part was first effective. Column four
indicates the serial number at which the part was discontinued. No entries indicates the part is
good for all serial numbers.
5 Qty This indicates the quantity of parts used.
6Name & Description An item name is separated from the description by a colon (:). Because of space limitations, an
item name may sometimes appear as incomplete. Use the U.S. Federal Catalog handbook
H6-1 for further item name identification.
7Mfr. Code This indicates the code of the actual manufacturer of the part.
8Mfr. Part Number This indicates the actual manufacturer’s or vendor’s part number.
Abbreviations conform to American National Standard ANSI Y1.1–1972.
Chassis-mounted parts and cable assemblies are located at the end of the
Replaceable Electrical Parts List.
The table titled Manufacturers Cross Index shows codes, names, and addresses
of manufacturers or vendors of components listed in the parts list.
Abbreviations
Chassis Parts
Mfr. Code to Manufacturer
Cross Index