Menus
This section describes the various menus you can access in the instrument and provides menu diagrams showing the location of the available selections. The menu diagrams are organized in alphabetical order.
Refer to the WFM700 Series Technical Reference document on the
Making Menu Selections
Mutually Exclusive Buttons
The menu system uses several different methods for entering measurement and monitoring parameters.
Some configuration parameters use a set of boxes containing all of the possible values or states (settings).
HThe currently selected setting is highlighted.
HTo change to another setting, touch the box containing that setting or press the SELECT button to cycle through all of the settings to the desired one.
Numeric Value Menus Some configuration parameters use a numeric value box.
HThe knob icon appears in the value box and the parameter value is outlined.
HUse the general purpose knob to change the numeric value.
Checkbox Tables In the Configure menu, some configuration parameters use check box tables. Touch the box on the screen to change selections.
List Box Some configuration parameters show a list of items that you can scroll through using the general purpose knob. Select items by using the SELECT button or by touching the desired item on the screen.
Exiting a Menu To exit all menus except the Configure menu, press the CLR MENU button or press any major mode button. To exit the Configure menu, press the CONFIG button (once if you are at the top level or twice if you are in a submenu) or press any major mode button.
WFM700 Series Waveform Monitors User Manual | 2- 11 |