Reference

Status Displays

Press the STATUS button and then touch the Display soft key to select from the following status displays:

HSession. Use this selection to view the Video Status/Session, Audio Status/Session, or Auxiliary Data Status displays.

HAlarm Status. Use this selection to view the status of the General, Serial, Audio (Option DG only), Auxiliary Data, or Physical (WFM700M only) alarms.

HEvent Log. Use this selection to enable, disable, configure, and view the event log.

Status Display Colors Messages and values in the different status displays use the following colors to help indicate signal status:

HWhite. Identifies items that represent changes in the instrument state.

HGreen. Indicates error conditions that have cleared.

Video Status and Session Display

HYellow. Indicates a warning condition that might require attention but does not meet the requirements of an error condition.

HRed. Indicates signal information that has been found to be in an ongoing error state.

The Video Status portion of the display (left side) shows the current status of the video signal being monitored. The Video Session portion of the display (right side) shows the cumulative results of the current video monitoring session. Use the Session Stopped/Running soft key to start or stop the monitoring session. Use the Reset Session soft key to clear the display.

Refer to the WFM700 Series Technical Reference document on the CD-ROM for descriptions of the status display elements.

NOTE. The Session: Stopped/Running and the Reset Session soft keys affect both the audio and video session displays. For example, if you stop/start or reset the session when the currently displayed session is audio, the video session is also stopped/started or reset.

WFM700 Series Waveform Monitors User Manual

3- 37