Telect T3 LOOPING, MONITORING

DNI-3 User Manual User Functions

Step Action

1.Using one Mini-WECO patch cord:

a.Insert the plug of one end into the IN TLJ at the first location.

b.Insert the plug of the other end into the OUT TLJ at the second location.

2.Using a second Mini-WECO patch cord:

a.Insert the plug of one end into the OUT TLJ at the first location.

b.Insert the plug of the other end into the IN TLJ at the second lo- cation.

O

I

O

I

LOOPING

To temporarily loop an NE or DCS OUT port to its IN port, use the TLJs on the front of the DNI-3 panel and a Mini-WECO looping plug.

Insert the looping plug into both the IN and OUT TLJs on the front of the DNI-3 panel for looping either the NE (NE-2) or the DCS (NE-1) circuit.

MONITORING

Use the TLJs on the front of the DNI-3 panel and the following additional equipment:

•Mini-WECO patch cord (Mini-WECO plug at each end)

•Test set

Issue A Rev 2 108469 Telect, Inc. 4-3