Teledyne 2102 installation and operation guide Wireless Module Components Bottom View

2102 Wireless Communication Module

Section 1 Quick Start Guide

2

1

3

4

Figure 1-2 2102 Components - Bottom View

Table 1-2 Wireless Module Components - Bottom View

Item No. Description

1Communication Connector

2Cap

3Cap Holder

4Latch

1.2.2Communication When a communication connector is not in use, the con-

Connectors	nector must always be capped (Figures 1-3and 1-5). The cap
	will seal the connector to prevent corrosion, prevent moisture
	from entering the unit, and improve communications.
	When a communication connector is in use, store the cap on the
	holder next to the connector (Figures 1-4and 1-6). The communi-
	cation connector will be sealed by its mating connector.

CAUTION

Caps PUSH ON and PULL OFF. Do not rotate the caps to remove them from the connectors.

Note

For modules to correctly stack and lock together, protective caps between the modules must be stored on the holders.

1-3