|
| Electrode Span Menu, then |
|
| perform a buffer calibration. |
|
| Check the sensor and |
|
| electrode for proper |
|
| operation. |
| Wrong temperature | Examine the temperature |
| correction has been | and the Temperature |
| calibrated in the temperature | Calibration Menu. Adjust trim |
| trim. | as required. |
LCD turns black. | Power to the transmitter | Cycle power off for |
| dropped below the minimum | approximately 10 seconds, |
| required voltage for a | and then on again. |
| fraction of a second (gray- |
|
| out). Typically caused by a |
|
| voltage transient. |
|
Model
