Telex RE-2 Trouble Shooting Guide continued, Problem, Possible Causes, Solutions, tons see page

Trouble Shooting Guide (continued)

Problem	Possible Causes	Solutions
Interference (continued)	Receiver is too close to digital signal	Move the receiver to a differ ent
	processor or similar device	location
	Strong electromagnetic field from	Use ClearScanTM to change the operat-
	stage lighting or other source near the	ing frequency. Repair or remove the
	transmitter or receiver, which may be	source of interference. Move the re-
	producing RF noise at or near the op-	ceiver to a different location.
	erating frequency
Short range or drop-outs	RF reflective metal obstacles between	Move the obstacles, or reposition the
	the transmitter and receiver	receiver/antennas
	Poorly oriented beltpack antenna	Check the antenna connection and re-
		orient the bodypack so the antenna is
		vertical (up and down) and facing the
		receiver, if possible.
	Faulty receiving antenna system	Check all antenna connections and re-
		position to be in line-of-sight with the
		transmitter
Can't change settings on receiver or	Lock-out feature is enabled	Disable lock out (see pages 3 and 8)
transmitter
Bodypack or Handheld transmitter	On/Off lock-out is engaged	Put the on/off switch in the off position
will not turn off, display says On-Loc		and press one of the programming but-
		tons (see page 8)

-10-