Power-Up

Make sure any local power supplies are plugged in, then turn on the power switches of any phantom power supplies (PS- 2001L, SPS-2001, etc.)

Sidetone Adjustment

The SS-1002, SS-2002, and SS-2002RM use full-duplex audio (the same as conventional telephone lines) in which the talk and listen audio are sent and received on the same wires. Thus, when you talk, you also here your own voice back as with a telephone. If you are using the built-in speaker for listening and a either a panel microphone or handheld microphone for talkback, you could experience unwanted feedback since the microphone may pick up your returned voice audio from the speaker and re-amplify it. This could also happen if you are using a headset or headphones with open-ear style earmuffs. On the other hand, if you are using earmuffs that completely enclose the ears, the microphone is not likely to pick up the returned audio. A certain amount of your own voice level is desirable to overcome the muffled sensation when talking. The sidetone adjustment is different for these different operating conditions:

If you are suing the speaker with a panel microphone, or if you are using an open-ear style headset or headphones, adjust sidetone as follows:

1.SS-2002 & SS-2002RM only: activate channel 1 as described in the operating instructions.

2.Activate talk and listen as described in the operating instructions

3.Slowly increase the volume to maximum while talking into the microphone.

4.Using a small flat-bladed screwdriver, adjust the channel 1 sidetone trimmer to minimize your voice level in the head- phones.

5.SS-2002 & SS-2002RM only: activate channel 2 and repeat the above steps to adjust the channel 2 sidetone.

6.Install the intercom station mounting screws after completing the adjustments. The station is now ready for use.

If you are using headphones that completely enclose the ears, adjust sidetone as follows:

1.SS-2002 & SS-2002RM only: activate channel 1 as described in the operating instructions.

2.Activate talk and listen as described in the operating instructions.

3.Set the volume control to the normal listening level for intercom audio

4.While talking into the microphone, use a small flat-bladed screwdriver to adjust the channel 1 sidetone trimmer so that you can hear your own voice in the headphones at an acceptable level.

5.SS-2002 & SS-2002RM only: activate channel 2 and repeat the above steps to adjust the channel 2 sidetone.

14

Page 13 Page 15
Page 14
Image 14
Telex SS-2002RM, SS-1002 manual Power-Up, Sidetone Adjustment
Page 13 Page 15

SS-2002, SS-2002RM, SS-1002 specifications

The Telex SS-1002 is a highly regarded wireless intercom system designed primarily for broadcast, film, and live production environments. Known for its reliable performance and user-friendly features, the SS-1002 has become a staple in professional communication setups.

One of the standout features of the Telex SS-1002 is its advanced wireless technology. The system operates in the 2.4 GHz ISM frequency band, which provides robust transmission capabilities while minimizing interference from other wireless devices. The range of the SS-1002 can extend up to 300 feet, allowing users to communicate seamlessly across large production areas.

The SS-1002 is also characterized by its high-quality audio clarity. Utilizing digital transmission techniques, it delivers clear, distortion-free communication, which is crucial for effective coordination during live events. The unit is equipped with a full-duplex communication system, allowing for simultaneous speaking and listening, which enhances the collaborative workflow among team members.

Another notable aspect of the Telex SS-1002 is its ease of use. The system features intuitive controls and a straightforward interface, making it accessible for both technical and non-technical users. Users can quickly adjust volume levels, switch channels, and monitor battery life through the device’s LED indicators.

Power efficiency is yet another characteristic of the SS-1002. It runs on rechargeable lithium-ion batteries, providing up to 10 hours of continuous use on a single charge. This long battery life reduces downtime and ensures that production crews can maintain constant communication throughout demanding schedules.

Moreover, the Telex SS-1002 supports multiple belt packs, enabling a scalable communication network tailored to the needs of the production team. Each belt pack can be configured to operate on different channels, facilitating private communication among specific groups without causing interference with others.

In conclusion, the Telex SS-1002 stands out in the realm of wireless intercom systems due to its advanced technology, high audio fidelity, user-friendly design, and efficient power management. Its versatility and reliability make it an essential tool for professionals in the broadcasting and live production industries, where effective communication is key to success.
Top Page Image Contents