The status screen may be changed to an alternate display by pressing <MENU> for 3 seconds. The alternate display shows the base name and number in double wide and double tall characters. It also indicates the system's band and frequencies in normal characters. Pressing <MENU> for 3 seconds again will revert back to the main status screen.
The number of the base station can also be set from 1 to
10.In a system of base stations managed by a frequency manager the base number must be set to a unique number because this is how the frequency manager identifies the base station.
Encryption Code
The base station has a four digit, hexadecimal, encryption code that can be set by the user. It must match the code at the beltpack in order for communication between the beltpack and base station to occur.
Changing the Encryption Code
1.From the status screen hit <MENU> once to arrive at the security code / system settings / intercom set- tings/RF meter menu screen.
2.Se lect the se cu rity code menu with the <UP>/<DOWN> arrow buttons and press <SET> to go to the security code screen.
3.The first code position will be flashing. Set the digit by using the <UP>/<DOWN> arrow buttons then press- ing <SET> to go to the next code position.
4.After the last code position is set press <MENU> to go back to the status screen or press <SET> to begin edit- ing again.
System Settings
The systems settings allows a number of base station charac- teristics to be set. This includes base name, base number, in- tercom type, aux type, base TX power, BP off mode, sidetone and frequencies.
Name and Number
The name of the base station may be set to any 10 digit al- phanumeric character. For example, in a football situation the name of the coach may be entered. This provides an easy identifier to the user as to who’s base station it is.
Changing the Base Name and Number
1.From the status screen hit <MENU> once to arrive at the security code / system settings / intercom set- tings/RF meter menu screen.
2.Se lect the sys tem set ting s menu w ith th e <UP>/<DOWN> arrow buttons and press <SET> to go to base setting
3.Select the base name and number menu with the
<UP>/<DOWN> arrow buttons and press <SET> to go to the base name and number set screen.
4.The first name position will be flashing. Set the alpha- numeric character by using the <UP>/<DOWN> arrow buttons then pressing <SET> to go to the next posi- tion. Up to 10 characters may be set.
5.After the alphanumeric characters are set the screen proceeds to the number selection. Select the number menu with the <UP>/<DOWN> arrow buttons and press <SET> to set it.
6.After the number is set press <MENU> to go back to the status screen or press <SET> again to begin the process over again.
Base Main Settings
This important screen enables the user to set the wired in- tercom type connected to the system, the auxiliary input type, the transmitter power, BP Off Mode, and the base station and beltpack side tone levels.
