Section
2
BTR-1 Base Station
Controls and Connections - Front Panel
1 | 2 | 3 | 4 | 6 | 7 | 9 | 11 |
2 | 4 | 5 | 8 | 10 |
CONTRAST ADJUST
Figure
BTR-1 - Front Panel
1.On/Off Switch: Turns the base station on/off
2.[Menu] and [Set] buttons: Used to select menus and set options on the LCD.
11.Local Headset Connector: Male XLR connector for Telex units, Female XLR connector for RTS units. A dy- namic or electret headset microphone is automatically de- tected.
Telex Units
3. | Backlit LCD w/Contrast Adjust: Adjust the level of |
| contrast to the LCD. |
4. | [Up] and [Down] buttons: Used to select menus and set |
| options on the LCD. |
5. | Peak Aux Level Light: Will flash red when the auxiliary |
| input level into the base station is too high. |
(1) Microphone | (4) Headphone |
Shield | Low |
(2) Microphone | (3) Headphone |
Audio | High (+) |
6. | Peak Intercom Level Light: Will flash red when the in- |
| tercom input levels into the base station are too high. |
7. | Talk Light: Green when the talk button is active. Will |
| turn red when the microphone level into local headset is |
| high. |
8. | Talk Button: Press to enable the audio path from the |
| headset. |
9. | Headset Volume: Used to adjust the volume level out to a |
| headphone. |
10. | Microphone Gain: Adjusts the audio gain from the local |
(4) Headphone
Low
(3) Headphone
High (+)
PUSH
(5) (4) Headphone Low
(3)Headphone High (+)
RTS Units
(1)Microphone Shield
(2)Microphone Audio
(1)Microphone Shield
(2)Microphone Audio
headset microphone. |
Figure