![](/images/new-backgrounds/1257491/25749135x1.webp)
ZEPHYR XPORT USER’S GUIDE
2.3 What have we here?
Time for a guided tour of your XPORT.
Accessories
A stand is available for the Xport to tip the unit up for easier viewing. Contact your Telos representative to order Telos Part # 1451- 00199- 001.
A soft carry vase is also available. Request Telos Part # 2091- 00032
2.3.1 The front panel
THE MIXER SECTION
The XPORT's mixer section (pictured above) is easy to under stand. There are two inputs: MIC and LINE. The mixed audio from these sources is fed to the Omnia AGC/Limiter and to the codec for transmission to the far end.
This audio mix, together with the received audio is output on the headphone and the Monitor Mix Out jacks. The ratio of these two audio sources is determined by setting of the MIX control.
See the inside rear cover of this manual for a block diagram of how the mixer functions.
THE DISPLAY AND USER INTERFACE
The Zephyr XPORT has two menus screens accessed by pressing the <NAV> button. Repeated presses of this button, pages through the screens of options. The following information is meant as a quick introduction only. Section 3 (The Details) covers the menu selections in detail.
8CHAPTER 2 - GETTING STARTED