ZEPHYR
XPORT
USER’S GUIDE
CHAPTER 1 - INTRODUCING THE XPORT v
e
WARNING:
ZEPHYR XPORT USES CONVECTION COOLING. DO NOT BLOCK THE
VENTILATION OPENINGS IN THE TOP AND REAR OF THE UNIT.
FAILURE TO ALLOW PROPER VENTIUALATION COULD DAMAGE THE
UNIT OR CREATE A FIRE HAZARD.
DO NOT PLACE THE UNIT ON A CARPET, BEDDING, OR OTHER
MATERIALS THAT COULD INTERFERE WITH THE REAR PANEL
VENTILATION OPENINGS.
DO NOT STACK MORE THAN 3 UNITS HIGH.
This symbol, wherever it appears, alerts you to the presence
of uninsulated, dangerous voltage inside the enclosure –
voltage which may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important
operating and maintenance instructions. Read the manual.
TO PREVENT RISKS OF
ELECTRIC SHOCK,
DISCONNECT POWER
CORD BEFORE SERVICING
USA CLASS A COMPUTING DEVICE INFORMATION TO USER. WARNING: This
equipment generates, uses, and can radiate radio-frequency energy. If it is not installed and
used as directed by this manual, it may cause interference to radio communication. This
equipment complies with the limits for a Class A computing device, as specified by FCC Rules,
Part 15, Subpart J, which are designed to provide reasonable protection against such
interference when this type of equipment is operated in a commercial environment. Operation of
this equipment in a residential area is likely to cause interference. If it does, the user will be
required to eliminate the interference at the user’s expense. NOTE: Objectionable interference
to TV or radio reception can occur if other devices are connected to this device without the use
of shielded interconnect cables. FCC rules require the use of only shielded cables.
CANADA WARNING: This digital apparatus does not exceed the Class A limits for
radio noise emissions set out in the Radio Interference Regulations of the Canadian Department
of Communications.” “Le present appareil numerique n’emet pas de bruits radioelectriques
depassant les limites applicables aux appareils numeriques (de les Class A) prescrites dans le
Reglement sur le brouillage radioelectrique edicte par le ministere des Communications du
Canada.”
SAFETY CAUTION: “To reduce the risk of fire, use only N0. 26 AWG gauge
Telecommunications line cord to connect between your Xport and the telephone circuit.”