Telular SX6P-200C user manual SX6P Setup, Ruim Card Installation Ruim Model Only

SX6P Setup

RUIM Card Installation (RUIM Model Only)

Consult your service provider to determine if your unit requires the use of a RUIM (Removable User Identity Module). If it is a RUIM model, your SX6P will only be able to place emergency calls until you install a RUIM card. It will not receive calls or allow non-emergency outgoing calls without the RUIM card installed. For an explanation of how to configure your RUIM once your SX6P is set up, see RUIM Usage on page 5.

1.Remove the power cord if it has already been connected. The power cord must be removed whenever a RUIM Card is removed or installed.

2.Remove the RUIM compartment cover. - see Figure 1.

3.Open the RUIM compartment holder.

4.Line up the RUIM card with the arrow on the RUIM card holder - see Figure 2.

5.Gently insert the RUIM card in the slot of the RUIM card holder.

6.Close the RUIM card holder.

Note:

Do not force the RUIM card holder shut. Make sure the RUIM card is aligned properly with the directional arrow on the holder.

7.Reattach the RUIM compartment cover, closing it with the separate cover screw provided.

RUIM Compartment Cover

Cover Screw

	RUIM Card
		Holder
			RUIM Card
Figure 1 - RUIM compartment cover.		Figure 2 - RUIM card installation.

Phonecell® SX6P CDMA 1 User Manual