Loading Windows for Workgroups
2-8 Getting Started
Loading Windows for Workgroups
If you have decided to load DOS and Windows for Workgroups, follow
these steps. If you have decided to load Windows 95, skip this section.
Loading PHDISK Loading PHDISK creates an area on your hard
disk drive which stores information upon disk
shutdown. This partition is created
automatically when you startup your computer
for the first time.
1. When the Welcome to Windows 95 screen
appears, read the screen and press C to
continue.
You are prompted to reset your system.
2. Press any key.
Your system is reset and the Windows 95
Setup screen appears.

Choosing the

operating system 1. To begin installation, select Next.
You are prompted to select an operating
system.
2. To change to Windows for Workgroups or
DOS, select Change.
You are asked to choose the operating
system you want to install.
3. Select No, I want to install MS-DOS 6.22
and Microsoft Windows for Workgroups
3.1.
An Electronic License Agreement appears.
4. Read the agreement and select I Accept.
Your computer hardware is configured.
When finished, a Finishing Setup window
appears.
5. Press Finish to restart your computer.

eug-2.frm Page 8 Thursday, January 23, 1997 11:22 AM