Loading Windows 95
2-10 Getting Started
Loading Windows 95
If you have decided to load Windows 95, follow these steps:
Loading PHDISK Loading PHDISK creates an area on your hard
disk drive which stores information upon disk
shutdown. This partition is created
automatically when you startup your computer
for the first time.

Choosing the

operating system Complete the following steps to the operating
system and setup files for your operating
system and perform system analysis.
1. When the Welcome to Windows 95 screen
appears, read the screen and press C to
continue.
You are prompted to reset your system.
2. Press any key.
Your system is reset and the Windows 95
Setup screen appears.
3. To begin installation, select Next.
You are prompted to select an operating
system.
4. To accept the default of Windows 95, select
Next.
You are prompted to configure your
computer.
5. Press Next.
6. Follow instructions on your screen to
complete Windows 95 setup.
You are prompted to finish Windows 95
setup by restarting your computer.
7. Press Finish to select the default of
restarting your computer.
eug-2.frm Page 10 Thursday, January 23, 1997 11:22 AM