Installing PC Cards
3-14 Installing Internal Accessories
2. Insert the connector end of the PC card
label-side up into the slot.
3. Gently push the PC card in as far as it can
go.
4. Save the filler card for later use.
Removing a PC card For ease of access your computer does not cover
the slots for the PC cards. For this reason it is
important at all times to have both slots
occupied by a PC card or a filler card.
Whenever you remove a PC card, replace it with
the original filler card.

Configuring

Ethernet PC cards Some Ethernet cards expect to use a portion of
memory reserved for the video adapter. If this
happens, you must reconfigure the Ethernet
eject button
for upper eject button
for lower
filler
cards
PC card PC card
eug-3.frm Page 14 Thursday, January 23, 1997 3:26 PM