Texas Instruments bq24010/2 manual Reference, 1. Bill of Materials, bq24012, Description, Size

Bill of Materials

3.3 Bill of Materials

Table 3–1 lists materials required for the EVM.

Table 3–1. Bill of Materials

	bq24010	bq24012	Ref	Description		Size		MFR	Part Number
Item#	–1	–2	Des
1	0	0	C1	Capacitor, ceramic, X5R,		805		Panasonic	ECJ-2YB1A105K
				1 µ F, 10 V
2	1	1	C2	Capacitor, ceramic, X5R,		805		Panasonic	ECJ-2YB1A105K
				1 µ F, 10 V
3	1	1	C3	Capacitor, ceramic, X7R,		805		Panasonic	ECJ-2YB1C474K
				0.47 µ F, 16 V
4	1	1	D1	Diode, LED, red, 1.8 V,		603		Lite-On	160-1181-1-ND
				20 mA, 20 mcd
5	2	2	D2, D3	Diode, LED, green, 2.1 V,		603		Lite-On	160-1183-1-ND
				20 mA, 6 mcd
6	1	1	J1	Terminal block, 2 pin, 6 A,		0.27 ×	0.25	OST	ED1514
				3,5 mm
7	2	2	J2, J3	Terminal block, 4 pin, 6 A,		0.55 ×	0.25	OST	ED1516
				3,5 mm
8	3	3	J4, J5,	Header, 3 pin, 100 mil		0.100 × 3		Sullins	PTC36SAAN
			J6	spacing, (36-pin strip)
9	3	3	R1, R2,	Resistor, chip, 1.5 kΩ	,	603		Std	Std
			R5	1/16 W, 1%
10	2	0	R3, R6	Resistor, chip, 1 MΩ ,		602		Std	Std
				1/16 W, 1%
11	0	1	R6	Resistor, chip, 10 kΩ	,	603		Std	Std
				1/16 W, 1%
12	1	1	R4	Resistor, chip, 1.3 kΩ	,	603		Std	Std
				1/16 W, 1%
13	1	0	U1	IC, single Li-Ion/Li-Poly,		MLP10		TI	bq24010DRC
				charge manager
14	0	1	U1	IC, single Li-Ion/Li-Poly,		MLP10		TI	bq24012DRC
				charge manager
15	3	3	—	Shunt, 100-mil, black		0.100		3M	929950-00
16	1	1	—	PCB, bq24010/2,				Any	SLUP162
				1.6 in × 1.3 in × 0.031 in

Notes: 1) These assemblies are ESD sensitive; ESD precautions must be observed.

2)These assemblies must be clean and free from flux and all contaminants. Use of no-clean flux is not acceptable.

3)These assemblies must comply with workmanship standards IPC-A-610 Class 2.

4)Reference designators marked with an asterisk (**) cannot be replaced by substitutes. All other components can be replaced with equivalent manufacturer components.

3.4Reference

1)bq2401x data sheet (SLUS530)

Schematic, Physical Layouts, and Bill of Materials 3-5