swru266
EM module, |
| |
RF reference design | ||
IR receiver |
|
|
|
| Interface connector |
IR transmitter |
| SPI/UART/I2C/IR |
Current |
|
|
measurement |
|
|
jumper |
|
|
USB |
| Debug/programming |
Power/interface |
| interface |
Reset | User | User |
| LEDs | button |
Figure 2: Target module layout
Figure 2 shows the key layout of the target module with some of the peripheral interfaces highlighted. For details of the target module features, please see chapter 6.
4.4Installing RemoTI software and Windows drivers
Before connecting the RemoTI target Module to a PC the required drivers for the tool must be installed. The latest version of the driver is included with the RemoTI software package. It can be downloaded from http://www.ti.com/remoTI.
After the software is installed, the driver files are located at this default location: C:\Texas Instruments\RemoTI\Tools\Driver
For instructions how to install the CC Debugger , please follow the quick start guide included with the CC Debugger .
The RemoTI software includes drivers for the target module. It is highly recommended to install this software before you connect the target module to the PC.
4.5RemoTI Software
Included with the RemoTI software package is the Target Emulator application. This application is located at the C:\Texas Instruments\RemoTI\bin folder. The target module is programmed to be a RF4CE network processor that receives commands from the Target emulator software and handles the RF4CE protocol
The Target Emulator lets you emulate a remote control on the PC. It displays all messages sent between the target module and the PC and works in many ways as a system that would interface to a real life remote control receiver.
The RemoTI software includes RF4CE example software for remote controls and for target interface. The software is designed to easily allow customized versions of remote controls and to support a variety of interfaces on the target side.
9/25
