Physical Considerations
2-5
Evaluation Module Layout
2.4 Area 300—Quad Device SOIC
Area 300 uses 3xx reference designators, and is compatible with quad op
amps, with or without shutdown, packaged in a 14-pin (without shutdown) or
16-pin (with shutdown) SOIC. This surface-mount package is designated by
a D suffix in TI part numbers, as in TxxxxID.
When using the nonshutdown version of the device, ensure that the IC is
aligned at the top of the IC pad array—the last two PCB pads (one on each
side—pins 8 and 9) will not be used.
Figure 2–3 shows the area 300 schematic.