4.1.Toolbar
Drop down list with all | |
the available COM ports | |
Stop capturing data from | Refresh list of serial |
the serial COM port | COM ports |
Pause capturing data from | Start logging to |
the serial COM port | file |
| Open log file for |
Start capturing data from | playback |
| |
the serial COM port | Start playback |
| of log file |
Configuration
Open application
user manual
About
information
The list of available COM ports will automatically be updated when the
clicking on the green “refresh” button 
.
4.2.Data capture
If the applicable COM port can be found when “refresh” has been clicked, the application will automatically try to capture data from the COM port. If communication is successfully
established, the “capture” button 
will be disabled and both the “Pause capture”
button 
and the “Stop capture” button 
will be enabled. If more than one device with the applicable COM port is connected to the PC, it could be that wrong COM port gets selected. In this case the first port in the list will be selected. If this was not the intended device to connect to, the appropriate COM port must be selected manually.
Using the “Stop capture” button will cause the nodes on display to be removed from the screen once the “Start capture” button is clicked. This differs from the “Pause capture” button which will maintain the nodes on the screen when the “Start capture” button is clicked.
9
