Constants and Measurement Units 288
If You’re Using the SI or ENG/US System
If You’re Using the SI or ENG/US SystemIf You’re Using the SI or ENG/US System
If You’re Using the SI or ENG/US System
Setting Custom Defaults
Setting Custom DefaultsSetting Custom Defaults
Setting Custom Defaults
The SI and ENG/US systems of measurement
(set from Page 3 of the MODE screen) use
built-in default units, which you cannot
change.
The default units for these systems are
available.
To set custom defaults:
1. Press 3…B3 to set Unit System =
CUSTOM.
2. Press D to highlight SET DEFAULTS.
3. Press B to display the CUSTOM UNIT
DEFAULTS dialog box.
If Unit System=SI or
ENG/US, the Custom
Units item is dimmed.
You cannot set a
default for individual
categories.