Basic Function Graphing 302
Basic Function GraphingBasic Function GraphingBasic Function GraphingBasic Function Graphing

Overview of Steps in Graphing Functions

Overview of Steps in Graphing FunctionsOverview of Steps in Graphing Functions

Overview of Steps in Graphing Functions

To graph one or more y(x) functions, use the general steps shown below. For a detailed
description of each step, refer to the following pages. You may not need to do all the
steps each time you graph a function.
Graphing Functions
Graphing FunctionsGraphing Functions
Graphing Functions
1. Set Graph mode (3) to FUNCTION.
Also set Angle mode, if necessary.
2. Define x and y components on Y=Editor
(8#).
3. Select (†) which defined functions to
graph.
Note: To turn off any stat data plots, press
‡ 5 or use † to deselect them.