Texas Instruments TI-89 Connectivity ConnectivityConnectivity, Connectivity

Connectivity 716

ConnectivityConnectivityConnectivityConnectivity

The TI-89 Titanium comes with a cable that lets you connect two units. Once connected,

you can transmit information between two units. A USB unit-to-unit cable is included with

the TI-89 Titanium; use the calculator’s USB port with this cable.

Note: The TI-89 Titanium features both a USB port and an I/O port, so you can connect

TI graphing calculators with either type of link port. However, using the I/O port requires

the I/O unit-to-unit cable (sold separately) or the USBSilver Edition cable (also sold

separately), which is used to connect to a computer.

Connecting before Sending or Receiving

Connecting before Sending or ReceivingConnecting before Sending or Receiving

Connecting before Sending or Receiving

Using firm pressure, insert one end of the cable into the link port of each unit. Either unit

can send or receive, depending on how you set them up from the VAR-LI NK screen.

You can link a TI-89 Titanium or Voyage™ 200 to another TI-89 Titanium, Voyage™200,

TI-89, or TI-92 Plus.