4.7 GPIO1 Tab
www.ti.com
TLV320AIC3007EVM Software
Figure 10. GPIO1 Tab
The GPIO1 tab (see Figure 10 ) selects options for the general-purpose inputs and outputs (GPIO) of theTLV320AIC3007.
The GPIO1 groupbox contains controls for setting options for the GPIO1 pin. The Function control selectsthe function of GPIO1 from the following:
•ADC Word Clock
•An output clock derived from the reference clock (see TLV320AIC3007 data sheet)
•Interrupt output pin to signal:
– Short Circuit– AGC Noise Threshold detection– Jack/Headset detection
•For use as an interrupt output, the behavior of the interrupt can be selected using the InterruptDuration control. A Single, 2ms pulse can be delivered when the selected interrupt occurs, orContinuous Pulses can be generated signaling the interrupt.
•Alternate I
2
S Word Clock
•A general-purpose I/O pin
– If selected as a General Purpose Input, the state of the GPIO1 pin is reflected by the Input Levelindicator. If selected as a General Purpose Output, the state of the GPIO1 pin can be set by usingthe Output Level button.
SLAU286 – June 2009 TLV320AIC3007EVM-K 17Submit Documentation Feedback