TV FUNCTION
E18
Prior to power your Singing Machine on, connect your TV aerialAntenna Jack (75 ohm) located on the back of
the unit.
Press the POWER button, the power LED indicator will illuminate. Aftera few seconds the screen will display a
picturealong with the audio. TheSinging Machine requires tuning to select an available TV station in your area.

PRE-SETTING THE TV STATIONS ONTO

THESINGING MACHINE MEMORY

BASICOPERATION OF TV

MEMORIZECHANNELS
TV channels can be searched automatically.
1. During MENU > PRESET menu, press the
MENU CURSOR buttons to select the
MEMORIZECHANNELS.
2.
3.
4. When ending the auto search, press the MENU
CURSORdown button.
5. Toexit the menu press the MENU button.
Channel can be selected by pressing the CH /
buttons on the system or CHANNEL /
buttonson the remote control.
Specific channel selection can be achieved by
pressingthe Number buttons (0-9, -/--) on the remote
control.
- -/-- button will only work in TV function mode.
CHANNELSELECT
Note:
Note:- Preset tuning can only be completed in TV
function.
- If the Singing Machine is not in the TV function
mode, press the Function selector button on
the front of the system or press TV/AV1/AV2
orTV/DVD on the remote control to switch to
TVmode.
There
areup to 181 channels that can be set.
Press the MENU CURSOR, select the right
direction button to start the automatic scanning
process. The scanning will begin from VHF
through to UHF. The TV stations will
automatically store onto the memory of the
system.
When scanning is completed, the system will
tuneitself to the lowest channel.
AIRCHANNELSAIRCHANNELS
MEMORIZEALL
PRESET
LANGUAGE
CHANNEL
SKIP
RECEPTION
MEMORIZECHANNELS
ENGLISH
2
ON
AIR
SELECT ADJUST EXIT
MENU
ENGLISH