Thermador Dishwasher manual Rinse Agent

Rinse Agent

To achieve proper drying, always use a liquid rinse agent, even if your detergent contains a rinse agent or drying additive.

Rinse Agent Dispenser

Open the rinse agent dispenser by lifting the tab with your thumb.

NOTE: The dishwasher indicates low rinse agent either by showing the

symbol in the countdown display, or illuminating the reill rinse agent light (model dependent).

Add liquid rinse agent to the dispenser as shown until the rinse agent reservoir is full. Wipe up any excess rinse agent that puddles when the dispenser reservoir is full.

Setting amount of rinse-aid

The amount of rinse-aid dispensed can be set from “r:00” to “r:06” .

•Open the door (for hidden controls only).

•Turn unit on by pressing the ON/OFF button.

•Hold down button [A] (see page 4) and press START until the display indicates “H:00”

•Release both buttons.

•Press [A] button until the display indicates “r:05”.

•Press [C]to select the desired setting.

•“r:00” means the Rinse Agent dispenser is off.

•“r:01” means the Rinse Agent dispenser is at the lowest setting.

•“r:02” means the Rinse Agent dispenser is low setting.

•“r:03” means the Rinse Agent dispenser is medium setting.

•“r:04” means the Rinse Agent dispenser is medium high setting.

•“r:05” means the Rinse Agent dispenser is high setting.

•“r:06” means the Rinse Agent dispenser is at the highest setting

•Save the selected setting by pressing the START button.

•Close the door (for hidden controls only).

Switching off rinse-aid reill indicator

•Set the rinse aid option to r:00

NOTE: Do not change the amount of rinse-aid unless there are streaks (select

lower setting) or water stains (select higher setting) visible on the utensils.

8